The use of low nitrogen burner manufacturers has increased from time to time. Many users will want to understand the installation method of Hebei Zhongxu low nitrogen burner. Now we have prepared the device description of Hebei Zhongxu low nitrogen burner for you, hoping to bring you assistance: burner body device: install the device flannel asbestos pad on the combustion cylinder.

   Extend the combustion cylinder into the furnace, align the screw hole position, fix the device flange on the furnace body, confirm the position where the burner head extends into the fire mouth, and tighten each outlet bolt to ensure the firmness of the burner device. Air inlet pipeline device: after the burner device is completed, connect the gas pipeline with the inlet pipe orifice of the combustor.

   During connection, pay attention to clean the dirt in the pipe first, and then seal it with sealant or tape to ensure that there is no gas leakage at the connection. The diameter of gas pipeline must meet the demand of rated gas supply. Smoke return pipeline device: during connection, pay attention to clean the dirt in the pipe first, and then seal it with sealant or tape to ensure that there is no leakage at the connection.

   The diameter of smoke return pipe must meet the requirements of rated flue gas volume. Electrical device: connect the power supply and relevant control installation (such as temperature controller) according to the electrical circuit diagram attached to the specification. During connection, carefully check the voltage and other parameters of the power supply and select appropriate wires.