Matters needing attention during the operation of the burner shall be connected to the peripheral circuit. When completing the automatic control of boiler temperature, pressure and water level, please connect according to the wiring diagram of the control system. With the gradual progress of people's life and death level, many people do not know what is the head of the fuel burner? Let Xiaobian introduce you.

   At this time, the flame detector senses the flame brightness and the controller enters the locked state. The ignition electrode delays the ignition for about 15 seconds, stops the ignition, and the combustor enters the normal working state. If the ignition fails, it does not form a flame.

   Or if the flame detector does not sense the flame brightness, after about 10 seconds of safety time, the safety alarm system acts, the starting working procedure of the burner is cut off, and the fault red light is on. When the burner is just started, for example, the flame detector has sensed the brightness.

   Then the safety system acts, the controller does not enter the normal program, the solenoid valve will not open, and the nozzle does not inject oil. After about 10 minutes of safety time, the fault red light is on. The above is the introduction of the head of the fuel burner introduced by Xiaobian to you. I'm very happy to bring you assistance. If you still don't understand, you can consult the website customer service.