How do the accessories of the combustion engine work? Accessories are an important part of combustion engine. Only by mastering the operation method can it be more conducive to the use effect in the future. Let's take a look at the working process of the accessory burner. Check the boiler level, temperature or pressure. Check the gas pressure, air pressure and residual fire of the combustor. When the fuel is diesel, check the storage capacity of the fuel tank. Check whether the oil pipe and oil pump are filled with oil.

   Leakage detection stage of air valve group: check whether the air valve is airtight. Purging stage before pre blasting: fully open the damper, purge the furnace, eliminate the residual gas in the furnace, and supply oxygen to the hall to promote the ignition process. Wind pressure detection: ensure the normal operation of the blower.

   Ignition stage: close the valve of combustion engine accessories to the ignition position, and open the working mode of ignition transformer and ignition valve of accessories to realize automatic ignition. Confirm that the flame is lit. Open the damper to the main fire position, and then open the main gas valve to establish the main flame.

   Close the ignition valve of the combustor and confirm that the main flame has been established. Implement large and small fire conversion or adjust the flame size in proportion. The burner monitors the liquid level, temperature or pressure, air pressure, air pressure and flame of the boiler during the whole working process, closes the burner and gas valve abnormally and gives an alarm.