How should natural gas burners be operated safely? Natural gas is used by many occupations because of its own advantages, especially incinerator. However, one thing we need to admit in the process of application is the safety of application, because the correct and safe operation of gas burner is particularly important. Today, let's talk about this topic.

   During the burning process of burner, if the fault light of program controller is on, please press the fault reset button, and the burner will be restarted after reset. If the unit cannot work normally after three times of operation according to the above methods, it is necessary to shut down and check the cause of the fault, and the engine unit can work normally only after correct elimination.

   After the burner is started, the rotation direction of the forced draft fan motor shall be consistent with the identification direction. At this moment, the burner enters the leakage detection and combustion automatic control program. The operator only needs to investigate the action of the servo motor, leakage detection controller and combustion controller. When any abnormality is found, it shall be handled correctly and normally.

   After the normal combustion operation of the natural gas burner, the operator shall pay attention to the investigation of the operation parameters of the circulation system and combustion system. During the operation, the operator shall have the necessary time to investigate the water level of the make-up water tank and prohibit the boiler equipment from running without water.