If the liyalu incinerator used in the boiler often needs to be burned for many times before it can start working, and the cause of the problem cannot be determined. Later, the situation became more serious. No matter how you burn it, it won't work. This requires pulling out the gun head for incineration test. Sparks occurred on the top of the two high-voltage lines, atomized light oil was sprayed on the nozzle, and the fan worked normally. Installed in place and burned from the beginning, the problem still exists. What's going on?

   The protection, repair and problem removal of liyalu incinerator such as liyalu boiler incinerator need the guidance of experienced skilled masters. According to experience, the main reason is that the air volume was large at that time, and the spark of the transformer was not enough to ignite the fuel. If it had been used normally, there might be the following:

   The oil pressure of the incinerator is small, the atomization is poor, the spark is not ignited, the power of the transformer is too small, and the relative backpressure is reduced to negative pressure. At this time, we do not need to find professionals. We can solve such problems as changing the transformer, the oil pump, the grease nozzle, the cleaning oil circuit, replacing all the problems that may appear, and then adjusting the throttle and oil pressure.