Troubleshooting for burner flameout: put out the fire after the flame is shaken due to unstable gas source. Treatment methods; Adjust the pressure and restart; Fault of flame detector: the flame detection probe is grounded during operation, or normal flame cannot be detected when it is too dirty, resulting in flameout. Treatment methods; Adjust the orientation of the probe, tidy up the appearance of the probe and restart it.
Circuit fault, unstable power supply or lack of phase, flameout in the process of formation. Treatment methods; Contact the electrician to check the power supply and wiring. For technical operation of gas burner, press the mother fire start button on the combustion control panel. After the mother fire operation indicator lights up for 10 seconds, admit that the mother fire is on. If the mother fire indicator light subsides within 10 seconds.
The combustion fault alarm buzzer on the combustion control panel sounds, which indicates that the combustion has failed; After waiting for 60 seconds, manually press the fault reset button of the program controller and restart the mother fire button. After the mother fire is normally lit, the operator acknowledges whether the mother fire is lit through the burner observation hole.
After recognition, press the fire start button on the burner control panel and delay for several seconds. In the future, after the fire operation indicator light is on, the operator in front of the furnace shall slowly open the load conditioning ball valve and increase the fuel gas air in proportion until the flame presents the main blue and slight red; After the fire is lit and stable, check whether the gas supply pressure of the main pipeline is at the normal scale.
加科时代|天籁之音,环保之魂引言近日,江西天沅环保集团旗下潍坊昌乐大明生物科技有限公司600万大卡导热油锅炉煤气、···
国家电力投资集团有限公司(简称“国家电投”)是中央直接管理的特大型国有重要骨干企业,肩负保障国家能源安全的重要···