The use of full-automatic burner is very convenient, but it is still dangerous if you are not familiar with it or there are illegal operations. Therefore, the safe use instructions of full-automatic burner are particularly important. If the burner cannot be started normally, and whether the fire indication of control box is on or not.

   At this time, check and confirm whether the power supply reaches the burner, whether the fuse is normal, and whether the burner control system is connected. On the other hand, if the burner stops working and the fire light of the control box is on, please press the reset button to let the burner try to ignite automatically. If it cannot be lit, the fire light is on again, please check whether there is oil in the mailbox and whether the manual valve of the combustion pipeline is opened.

   If the burner still cannot be started after the above conditions are confirmed, please contact the technician. If the power supply lacks phase, the thermal relay in the burner will act, the burner will enter the locked state, and the fire light will be on. After connecting the missing item line, in order to start again, please press the reset button of the thermal relay.

   When the fuel is used up, the burner will shut down automatically and the fire light will be on. Before starting again, please raise the oil level to avoid air mixing in the oil circuit. When the ambient temperature is lower than - 10 ℃, if the oil tank is placed outdoors, please protect the oil tank and oil pipe to prevent wax in the oil from solidifying and locking the burner.